System information

Installation and configuration 129
Table 31
IP Phone 1210 components list (cont’d.)
Component
Product code
250 VAC, Option 11C Standard European power
cord, Other EMEA, Kenya, Korea, Thailand,
Indonesia, Vietnam, India, Pakistan
NTTK16ABE6 NTTK16AB
3 m (9.9 ft) 125 VAC, Option 11C Swiss power cord
Switzerland
NTTK17ABE6 NTTK17AB
240 VAC, Option 11C UK power cord Hong Kong,
Ireland, United Kingdom, Singapore, Malaysia,
Bangladesh, Brunei, Sri Lanka
NTTK18ABE6 NTTK18AB
3 m (9.9 ft), 125 VAC, Option 11C Denmark power
cord Denmark
NTTK22ABE6 NTTK22AB
Argentina N/A A0814961
1.8 m (5.9 ft), 10 amp, IEC320-C13 Japan NTTK26AAE6 N/A
For more information about previous versions of the IP Phone, contact
your Nortel representative.
Installation and configuration
The following sections provide a step-by-step guide to install and configure
the IP Phone 1210:
• “Before you begin” (page 129)
• “First-time installation” (page 130)
•
“Configuring the IP Phone 1210” (page 130)
• “Connecting the components” (page 131)
•
“Startup sequence” (page 133)
Before you begin
Before installing the IP Phone 1210, complete the following preinstallation
checklist:
• Ensure one IP Phone 1210 boxed package exists for each IP Phone
1210 you install. For a list of IP Phone 1210 package components, see
Table 30 "Package components" (page 128).
• Ensure one software license exists for each IP Phone 1210 you install.
• Ensure the host call server is equipped with a Signaling Server that
runs the Line Terminal Proxy Server (LTPS) application.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.