System information

122 Nortel IP Phone 1210
After you install and configure an IP Phone, if power to the phone is
interrupted, you need not re-enter the IP parameters, node number,
Terminal Number (TN), or reacquisition of firmware.
Description
The IP Phone 1210 uses the customer IP data network to communicate
with the Communication Server 1000 (CS 1000). The IP Phone 1210
translates voice into data packets for transport using Internet Protocol.
Use a Dynamic Host Configuration Protocol (DHCP) server to provide
information that you can use for the IP Phone 1210 network and CS 1000
connections.
Figure 23 "IP Phone 1210" (page 122) shows the IP Phone 1210.
Figure 23
IP Phone 1210
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.