System information

Installation and configuration 117
The IP Phone 2007 supports both AC power and Power over
LAN options, including IEEE 802.3af Power Classification 2.
To use Power over Ethernet, where power is delivered over
the CAT5e cable, the LAN must support Power over Ethernet,
and an AC adapter is not required. To use local AC power,
the optional AC adapter can be ordered separately.
A tone sounds shortly before the IP Phone is ready to start
the Nortel IP Phone application.
6 Tap the Tools icon to access the Network Configuration menu.
To manually provision your IP Phone, see “Manual provisioning
of IP Phone 2007 and 1100 Series” (page 487)
7 A blue screen appears with Nortel. Once the set application has
loaded and started, Nortel Networks will appear in the middle of
the screen. Immediately press the following keys in sequence:
a 0
b 0
c 7
d star (*)
If you miss part of the configuration, unplug the phone from
the power for a few seconds and redo this step.
WARNING
If you are using local power, you must use the
Global power adapter or your phone fails to
operate.
--End--
When you complete the IP Phone connection, you must connect the phone
to the network. See “Dynamic Host Configuration Protocol” (page 405).
Startup sequence
When an IP Phone 2007 connects to the network, it must perform a startup
sequence. The elements of the startup sequence include:
• obtaining network access (if supported by the network infrastructure)
• obtaining VLAN ID (if supported by the network infrastructure)
• obtaining the IP parameters
• obtaining the automatic provisioning parameters
• connecting to the Call Server
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.02 26 May 2009
Copyright © 2003-2009 Nortel Networks. All Rights Reserved.
.