System information

102 Nortel IP Phone 2007

• Procedure 27 “Replacing an IP Phone 2007” (page 119).

• Procedure 28 “Removing an IP Phone 2007 from service” (page 119).

After you install and configure an IP Phone, if power to the phone is

interrupted, you need not re-enter the IP parameters, node number,

Terminal Number (TN), or reacquisition of firmware.

Description

The IP Phone 2007 uses the customer IP data network to communicate

with the Communication Server 1000 (CS 1000). The IP Phone 2007

translates voice into data packets for transport using Internet Protocol.

Use a Dynamic Host Configuration Protocol (DHCP) server to provide

information that you can use for the IP Phone 2007 network and CS 1000

connections.

Figure 18 "IP Phone 2007" (page 102) shows the IP Phone 2007.

Figure 18

IP Phone 2007

Components and functions

This section describes the following components and functions of the IP

Phone 2007:

• “Keys and functions” (page 103)

• “Services menu” (page 104)

• “Local Tools menu” (page 105)

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.02 26 May 2009