User`s guide

34
Contacts
Contacts stores up to 600 numbers or addresses.
Each Contacts entry can store several numbers or
addresses.
Information stored in Contacts is saved on your
SIM card.
A Contacts entry contains:
• A name — A name is required if you are storing
more than one number or address to the entry;
otherwise, it is optional. Typically, this is the
name of the person whose contact information is
stored in the entry.
• A ring tone — This is the sound your phone
makes when you receive phone calls or call
alerts from any of the numbers stored in the
entry. You can assign the ring tone from your list
of ring tones. If you do not assign a ring tone, the
entry is created with a default ring tone
assigned.
• A picture — This picture appears on the display
when you receive phone calls from any of the
phone numbers stored in the entry. You can
assign the picture from the pictures stored in the
media center. If you do not assign a picture, the
entry is created with no picture assigned.
• A Contacts type — Each number or address
stored must be assigned a Contacts type:
• A number or address — Each Contacts entry
must contain a number or address. This may be
any type of phone number, Boost
TM
Walkie-Talkie number, email address, or IP
address.
A
Mobile phone number
B
WT Boost
TM
Walkie-Talkie
number
C
Work1 phone number
D
Work2 phone number
E
Home phone number
F
Email email address
G
Fax phone number
H
Pager phone number
J
IP IP address
K
Other phone number