LED Mirror Cabinet BPS2636
Thank you for purchasing this product. If you have any questions, please contact our customer service department. We are always willing to help you. Important Notices: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Please make sure all parts are included. When taking all parts out, please put them on a soft surface to prevent scratches. As this product is made of iron, the edges and corners are sharp, please protect yourself from scratching during installation.
Installation Steps: 1. Determine installation location Please mark the hole location on the wall according to the hole spacing on the back of the wall cabinet. Then, drilling the hole according to the mark location and install the glue plug screw into the holes. Please install at least 3 screws or more to make sure the wall cabinet is stable. A B B C B 2.
3. Install Plug Please buy a suitable plug to connect the wire, one of which is ground wire. if you don't need it, you can leave it alone, but please pay attention to the safety of using idle lines. Live-brown Earth Green & yellow Neutral-blue LIVE Live supply-Red or brown Earth supply-Green/yellow Neutral EARTH supply-Black or blue NEUTRAL 3 4. 3PCS Test: After the installation is completed, please test whether the LED light can be normally used.
Door Adjustment： NOTE: This step applies only if the cabinet’s mirror doors (two or three doors mirror cabinet) are uneven by up to 0.5mm.
Pay attention: The wrong lifting method may cause the mirror cabinet door to not close tightly.
