Owner's Manual

6.) Once the parts have been installed,
apply pressure by hand.
7.) Once all parts are installed, allow parts to sit in
the top inverted for 25 minutes.
(See Figures 6 and 7). This will allow the adhesive
to set properly. Once the parts have set, you are
ready to install the top back on your Jeep.
Figure 5. Apply pressure by hand
T
H
E
R
M
A
L
A
C
O
U
S
T
I
C
C
O
N
T
R
O
L
Figure 6 – Hardtop removed and
inverted with headliner installed.
(4 Door Shown) 2007 & Up
Figure 7 – Hardtop removed and
inverted with headliner installed. 1997-2006
Figure 6
Figure 7
NOTE: 2003 TO 2006 TJ models with factory speaker
pods will have cutouts to fit around pods. (not shown)
www.BoomMat.com
800-264-9472
8.) Reinstall the hardtop according to the manufacturer’s
suggested installation.
INS-3006 rev 6/16