Instructions For Use Manual

48
48MANAGE Mode
48
Setup Odometer
If the NODE display is currently showing Odometer, start with Step 3.
1. Enter MANAGE mode. Hold
B
for three seconds.
The Manage mode starts with the Bike Selection display.
2. Browse
s1
to Odometer.
The first digit is highlighted.
3. To change the rst digit, browse
T
or
B
.
To set the rst digit and proceed to the next digit, press
s2
.
The next digit is highlighted.
4. Repeat Step 3 to select the other four digits.
5. To save your odometer setting and proceed to the Set Language function,
press
s1
.
6.Chooseoneofthefollowing:
•FollowtheinstructionstosetLanguageonpage49.
•Toseeotherfunctions,browse
s1
.
•ToreturntoRIDEmode,hold
B
for three seconds.
1.
3 and 4.
B
(3 seconds)
2.
5.
T
B
s1
s2
s1
or