Instructions For Use Manual

41
41MANAGE Mode
41
Setup units
If the NODE display is currently showing Temperature Units, start with Step 4.
1. Enter MANAGE mode. Hold
B
for three seconds.
The Manage mode starts with the Bike Selection display.
2. Browse
s1
to temperature.
3. If needed, change temperature to On. Press
s2
to change.
To save your choice and proceed to the temperature units function, press
s1
.
4. To change the temperature units (choose C° or F°), press
s2
.
To save your choice and proceed to the Dual View function, press
s1
.
5. Choose one of the following:
•FollowtheinstructionstosetDualViewonpage42.
•Toseeotherfunctions,browse
s1
.
•ToreturntoRIDEmode,hold
B
for three seconds.
1.
B
(3 seconds)
2.
s2
3.
4.
s1
s2
s1
s1