Instructions For Use Manual

32
32MANAGE Mode
32
Power
Switch sensor to Off or On
If the NODE is currently showing POWER, start with Step 3.
1. Enter MANAGE mode. Hold
B
for three seconds.
The Manage mode starts with the Bike Selection display.
2. Browse
s1
to power.
3. To change to Off or On, press
s2
.
To save your choice and proceed to the manage function for your choice,
press
s1
.
4. Choose one of the following:
•FollowtheinstructionstomanagePowerCalibrationonpage33.
•FollowtheinstructionstomanageHeartRateonpage34.
•Toseeotherfunctions,browse
s1
.
•ToreturntoRIDEmode,hold
B
for three seconds.
1.
3.
B
(3 seconds)
2.
s2
s1
s1
s1