Instructions For Use Manual

RECAP Mode

RECAP (Review Trip Data)

You can review all current data in the memory of the computer, including average

and maximum values.

Switch to RECAP mode

1. Hold

for three seconds.

The computer shows the END RIDE? display.

2. To switch the value (choose YES or NO), press

YES NO

Stops recording trip data

Switches to RECAP mode

Switches to RIDE mode

To save your choice and proceed to the mode you chose, press

Switch to RIDE mode (from any Recap function)

1. Hold

for three seconds. The computer shows the NEW RIDE? display.

2. To switch the value (choose YES or NO), press

If you select YES, all trip data will be erased. See page 13.

To save your choice and proceed to the Ride mode, press

(3 seconds)