User guide

Maintenance
WorkCentre 7500 Series Multifunction Printer 187
User Guide
2. Hold the staple cartridge unit by orange lever R1 and push it to the right.
3. Grip the staple cartridge by the orange tabs and remove the cartridge by pulling it firmly toward you.
Check inside the finisher for any loose staples and remove them.
4. Pinch both sides of the staple case (1) and remove the staple case from the cartridge (2).
1
1
2
5. Insert the front side of the new staple case into the staple cartridge (1), then push the rear side into
the cartridge (2).
1
2