User guide

Scanning
WorkCentre 7500 Series Multifunction Printer 115
User Guide
Scanning to a USB Flash Drive
You can insert a USB Flash Drive into the printer, scan a document, and store the scanned file on the USB
Flash Drive.
Note: The system administrator must set up this feature before you can use it. For details, see the
System Administrator Guide at www.xerox.com/office/WC75xxdocs.
To scan to a USB Flash Drive:
1. Load the original on the document glass or in the document feeder.
2. Insert your USB Flash Drive in the USB port on the printer control panel.
3. On the USB Drive Detected screen, touch Store to USB.
4. To change any of the scan settings, use the options at the bottom of the touch screen:
 Output Color
 2-Sided Scanning
 Original Type
 Scan Presets
For details, see Changing the Basic Scan Settings on page 109.
5. Press the green Start button.
The Job Progress screen appears, and the original is scanned. The file is stored on your USB Flash
Drive in the root directory.
6. Remove your USB Flash Drive from the printer.