Operating instructions

8 08/06
The EM-RES-01 expansion module is supplied in a housin
g
for assembly on the lowe
r
slot of the frequency inverter.
• Remove the lower cover (1) of the frequency inverter.
The slot for the EM-RES-01 expansion module becomes accessible.
1
Caution! The EM-RES-01 expansion module (2) is pre-fitted in a housing. Do NO
T
touch the PCB visible on the back, as modules may be damaged.
• Plug the EM-RES-01 expansion module (2) onto the slot (3).
2
3
• Re-install the lower cover (1).
This completes the assembly procedure.
When the supply voltage of the frequency inverter is switched on, the EM-RES-01
expansion module is ready for operation.
1