Operating instructions

168 Application manual Positioning 04/08
7.3 Parameter list, sorted by function
The parameter list is sorted by positioning functions. For the setting and display ranges, refer to nu-
merically sorted parameter lists in chapters "Parameter Menu (PARA)" and "Actual Value Menu
(VAL)".
Chapter No. Name of parameter
Reference system
3.5.2 1115 Feed Constant
3.5.2 1116
Gear Box: Driving shaft
revolutions
3.5.2 1117
Gear Box: Motor shaft revo-
lutions
Homing
4.2.1 1220 Operation Mode
4.2.1 1235 Start Homing (manual)
4.2.3 1130 Homing Mode
1131
Home-Offset
4.2.5 1132 Fast Speed
4.2.5 1133 Creep Speed
4.2.5 1134 Acceleration
4.2.5 1135 Ramp Rise Time
4.2.2 1139 Home Switch
JOG
Mode
4.5 1231 Jog-Mode Active
4.5 1232 Jog Clockwise
4.5 1233 Jog Anticlockwise
4.5.1 1170 Fixed Speed 1
4.5.1 1171 Fixed Speed 2
4.5.1 1172 Fixed Speed 3
4.5.1 1173 Fixed Speed 4
4.5.1 1174 Jog-Speed Keypad
Ramps
4.5.2 1175 Acceleration
4.5.2 1176 Ramp Rise Time
4.5.2 1177 Deceleration
4.5.2 1178 Ramp Fall Time
4.5.2 1179 Emergency Ramp
Positioning control
4.1.2 1221 Operation mode
4.4.5.1 1222 Start Positioning
4.4.5.1 1223 Stop Positioning
4.4.5.2 1230 Resume Motion Block
4.4.3.1 1224 Motion Block Change-Over 1
4.4.3.1 1225 Motion Block Change-Over 2
4.4.3.1 1226 Motion Block Change-Over 3
4.4.3.1 1227 Motion Block Change-Over 4
4.4.3.1 1254 Motion Block Change-Over 5
4.4.3.2 1228 Starting-Record Number
Teach-In
4.6 1239 Teach-In-Signal
Position Comparator
4.10 1242 Operation mode
4.10 1243 On-Position
4.10 1244 Off-Position
4.10 1245 Hysteresis
Chapter No. Name of parameter
Motion Blocks
4.3.1 1200 Motion Block Sel. (Writing)
4.3.1 1201 Motion Block Sel. (Reading)
4.4.2.1 1202 Target position / Distance
4.4.2.2 1203 Speed
4.4.2.2 1204 Acceleration
4.4.2.2 1205 Ramp Rise Time
4.4.2.2 1206 Deceleration
4.4.2.2 1207 Ramp Fall Time
4.4.1 1208 Motion Mode
4.4.1.3 1209 Touch-Probe-Window
4.4.1.3 1210
Touch
-Probe-Error: Next
Motion Block
Automatic sequence
4.4.2.4 1211 No. of Repetitions
4.4.2.4 1212 Delay
4.4.2.4 1213 Delay: Next Motion Block
4.4.2.4 1214 Event 1
4.4.2.4 1215 Event 1: Next Motion Block
4.4.2.4 1216 Event 2
4.4.2.4 1217 Event 2: Next Motion Block
4.4.2.4 1260 Interrupt-Event 1
4.4.2.4 1261 Int.-Event 1: Eval.-Mode
4.4.2.4 1262
Int.-Event 1:
Next Motion
Block
4.4.2.4 1263 Interrupt-Event 2
4.4.2.4 1264 Int.-Event 2: Eval.-Mode
4.4.2.4 1265
Int.-Event 2:
Next Motion
Block
Status indication
4.4.6 1218 Digital Signal 1
4.4.6 1219 Digital Signal 2
4.4.6 1247 Digital Signal 3
4.4.6 1248 Digital Signal 4
Actual
values:
6.1;
4.4.2.4
1246 Actual Motion Block
6.1;
4.4.5.2
1249
Motion Block to Resume
6.1 1255 Actual Motion Mode
Application manual Positioning 04/08168