Product Manual
Page 4 of 13
Intended Use
The Northern Tool & Equipment BONE-STER may be our smallest creeper, but its double-ribbed
body gives it an incredible 400 pound capacity! The 3-inch diameter wheels with gripping tires glide
smoothly over shop floors-even if the surface is less than perfect.
Technical Specifications
Property
Specification
Overall Dimensions
43”x 24”x 5-1/4”
Casters
3”
Material
Engineering-grade Co-polymer
Net Weight
13 lbs.
Weight Capacity
400 lbs.
Important Safety Information
⚠WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this creeper. Always
be aware of the environment and ensure that the tool is used in a safe and responsible manner.
Do not allow persons to operate or assemble the creeper until they have read this manual and
have developed a thorough understanding of how it works.
Do not modify this creeper in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
do the job better and more safely at the capacity for which it was intended. DO NOT use this
equipment for a purpose for which it was not intended.
Industrial or commercial applications must follow OSHA requirements.
⚠WARNING
This product may contain chemicals known to the State of California to cause cancer, birth
defects or other reproductive harm.
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to the State of California to cause cancer, birth defects, or other
reproductive harm. Some examples of these chemicals are:
- lead from lead-based paints,
- crystalline silica from bricks and cement and other masonry products, and
- arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To
reduce your exposure to these chemicals: work in a well-ventilated area, and work with approved