MSDS

ManualsBrandsBondo ManualsPaint1 gal. Home Solutions All-Purpose Putty

MATERIAL SAFETY DATA SHEET 3M™Bondo® Home Solutions (BHS) White Cream Hardener 07/21/11

____________________________________________________________________________________

_____________

Page 1 of 8

Material Safety Data Sheet

of properly

utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior

written agreement is

obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of

earning a profit

thereon.

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME: 3M™ Bondo® Home Solutions (BHS) White Cream Hardener

MANUFACTURER: 3M

DIVISION: Construction and Home Improvement Markets

ADDRESS: 3M Center, St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date: 07/21/11

Supercedes Date: 08/12/09

Document Group: 24-8194-3

Product Use:

Intended Use: Hardener for Fillers sold to consumers for repair of rotted wood based building materials

such as windows, doors, etc.

SECTION 2: INGREDIENTS

Ingredient C.A.S. No. % by Wt

BENZOYL PEROXIDE 94-36-0 30 - 60

WATER 7732-18-5 10 - 30

BENZOIC ACID, C9-11-BRANCHED ALKYL ESTERS 131298-44-7 10 - 20

ZINC STEARATE 557-05-1 3 - 7

OXIRANE, POLYMER WITH METHYLOXIRANE, MONOBUTYL ETHER 9038-95-3 3 - 4

CALCIUM SULFATE 7778-18-9 3 - 4

SECTION 3: HAZARDS IDENTIFICATION

3.1 EMERGENCY OVERVIEW

Specific Physical Form: Viscous

Odor, Color, Grade: White paste with slight ester odor

General Physical Form: Solid

Immediate health, physical, and environmental hazards: Closed containers exposed to heat from fire may build

pressure and

explode. Dust clouds of this material in combination with an ignition source may be explosive. May cause severe

eye irritation.

May cause allergic skin reaction.

MATERIAL SAFETY DATA SHEET 3M™Bondo® Home Solutions (BHS) White Cream Hardener 07/21/11

____________________________________________________________________________________

_____________

Page 2 of 8

3.2 POTENTIAL HEALTH EFFECTS

Eye Contact:

Severe Eye Irritation: Signs/symptoms may include significant redness, swelling, pain, tearing, cloudy appearance of

the cornea, and

impaired vision.

Skin Contact:

Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, and itching.

Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.

Inhalation:

Summary of content (16 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET 3M™Bondo® Home Solutions (BHS) White Cream Hardener 07/21/11 ____________________________________________________________________________________ _____________ Page 1 of 8 Material Safety Data Sheet Copyright, 2011, 3M Company All rights reserved.
PAGE 2
Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. May be absorbed following ingestion and cause target organ effects.
PAGE 3
Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Avoid contact with incompatible materials listed in the Reactivity Data Section. Cover, but do not seal for 48 hours. 6.2. Environmental precautions Place in a metal container approved for transportation by appropriate authorities. Dispose of collected material as soon as possible.
PAGE 4
. Use an additional glove (e.g. supported PVC or Nitrile) over the PE/EVAL glove, and change the over-glove frequently. 8.2.3 Respiratory Protection Avoid breathing of vapors, mists or spray. Avoid breathing of dust created by cutting, sanding, grinding or machining.
PAGE 5
Volatile Organic Compounds 0 % weight [Test Method: calculated per CARB title 2] Kow - Oct/Water partition coef No Data Available Percent volatile 20 % [Details: Water is the volatile component] VOC Less H2O & Exempt Solvents 0 g/l [Test Method: calculated SCAQMD rule 443.1] Viscosity No Data Available SECTION 10: STABILITY AND REACTIVITY Stability: Stable. Stable unless exposed to heat, flames and drying conditions. Materials and Conditions to Avoid: 10.1 Conditions to avoid Not determined 10.
PAGE 6
CHEMICAL INVENTORIES The components of this product are in compliance with the chemical notification requirements of TSCA. Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information. WHMIS: Hazardous MATERIAL SAFETY DATA SHEET 3M™Bondo® Home Solutions (BHS) White Cream Hardener 07/21/11 ____________________________________________________________________________________ _____________ Page 7 of 8 This MSDS has been prepared to meet the U.S.
PAGE 7
Section 6: Clean-up methods heading was added. Telephone header was added. Company Telephone was added. Section 1: Emergency phone information was added. Section 1: Emergency phone information was deleted. MATERIAL SAFETY DATA SHEET 3M™Bondo® Home Solutions (BHS) White Cream Hardener 07/21/11 ____________________________________________________________________________________ _____________ Page 8 of 8 Company Logo was deleted. Copyright was deleted. Section 16: Web address heading was deleted.
PAGE 8
MATERIAL SAFETY DATA SHEET 3M™Bondo® Home Solutions™ All Purpose Putty, 20052, 20054 Part A 02/13/12 ____________________________________________________________________________________ _____________ Page 1 of 9 Material Safety Data Sheet Copyright, 2012, 3M Company All rights reserved.
PAGE 9
Eye Contact: Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Skin Contact: Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Inhalation: Intentional concentration and inhalation may be harmful or fatal. Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.
PAGE 10
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed. Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention. Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical attention. Wash contaminated clothing and clean shoes before reuse. Inhalation: Remove person to fresh air.
PAGE 11
personal protective equipment. Call 3M-HELPS line (1-800-364-3577) for more information on handling and managing the spill. Contain spill. Cover spill area with a fire-extinguishing foam. An aqueous film forming foam (AFFF) is recommended. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Collect as much of the spilled material as possible using nonsparking tools.
PAGE 12
____________________________________________________________________________________ _____________ Page 5 of 9 Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Polyvinyl Alcohol (PVA) Polymer laminate . 8.2.
PAGE 13
TITANIUM DIOXIDE CMRG TWA, as respirable dust 5 mg/m3 TITANIUM DIOXIDE OSHA TWA, as total dust 15 mg/m3 SOURCE OF EXPOSURE LIMIT DATA: ACGIH: American Conference of Governmental Industrial Hygienists CMRG: Chemical Manufacturer Recommended Guideline OSHA: Occupational Safety and Health Administration AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL) MATERIAL SAFETY DATA SHEET 3M™Bondo® Home Solutions™ All Purpose Putty, 20052, 20054 Part A 02/13/12 _______________
PAGE 14
____________________________________________________________________________________ _____________ Page 7 of 9 Carbon dioxide During Combustion Styrene Oxide Not Specified Toxic Vapor, Gas, Particulate Not Specified SECTION 11: TOXICOLOGICAL INFORMATION Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components. SECTION 12: ECOLOGICAL INFORMATION ECOTOXICOLOGICAL INFORMATION Not determined. CHEMICAL FATE INFORMATION Not determined.
PAGE 15
NFPA Hazard Classification Health: 2 Flammability: 3 Reactivity: 1 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies.
PAGE 16
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M 3M USA MSDSs are available at www.3M.