SDS

3M™ Bondo® Glazing & Spot Putty 907, 907M, 907C, 907ES, 907W, 937, 937C 06/01/18
__________________________________________________________________________________________
Page 7 of 18
Flash Point
63 ºF [Test Method:Closed Cup]
Evaporation rate
No Data Available
Flammability (solid, gas)
Not Applicable
Flammable Limits(LEL)
1.00 %
Flammable Limits(UEL)
13.00 %
Vapor Pressure
<=27 psia [@ 131 ºF] [Details:MITS data]
Vapor Density
No Data Available
Density
13.047 lb/gal
Density
1.56 g/ml
Specific Gravity
1.56 [Ref Std:WATER=1]
Solubility in Water
Nil
Solubility- non-water
No Data Available
Partition coefficient: n-octanol/ water
No Data Available
Autoignition temperature
No Data Available
Decomposition temperature
No Data Available
Viscosity
33,000 - 450,000 centipoise
Hazardous Air Pollutants
0.27 lb HAPS/lb solids [Test Method:Calculated]
Volatile Organic Compounds
444 g/l [Test Method:calculated SCAQMD rule 443.1]
Volatile Organic Compounds
28.3 % weight [Test Method:calculated per CARB title 2]
Percent volatile
32.7 % weight [Test Method:Estimated]
VOC Less H2O & Exempt Solvents
444 g/l [Test Method:calculated SCAQMD rule 443.1]
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
Sparks and/or flames
Heat
10.5. Incompatible materials
Strong acids
Strong oxidizing agents
10.6. Hazardous decomposition products
Substance
Condition
Carbon monoxide
Not Specified
Carbon dioxide
Not Specified
Toxic Vapor, Gas, Particulate
Not Specified
SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be