SDS
3M™ Bondo® MEKP Liquid Hardener, P.N. 411, 609, 912, 912M, 912C, 912ES, 7653081
__________________________________________________________________________________________
Page: 3 of 11
Methyl Ethyl Ketone Peroxide
1338-23-4
15 - 40 Trade Secret *
2-Butanone, peroxide
Phlegmatizer
Trade Secret
10 - 30
Not Applicable
Methyl Ethyl Ketone
78-93-3
< 3
2-Butanone
Hydrogen Peroxide
7722-84-1
0.1 - 1.0 Trade Secret *
Hydrogen peroxide (H2O2)
Water
7732-18-5
< 3
Water
Phlegmatizer is a non-hazardous Trade Secret material according to WHMIS criteria.
*The actual concentration of this ingredient has been withheld as a trade secret.
SECTION 4: First aid measures
4.1. Description of first aid measures
Inhalation:
Remove person to fresh air. If you feel unwell, get medical attention.
Skin Contact:
Immediately flush with large amounts of water for at least 15 minutes. Remove contaminated clothing. Get immediate
medical attention. Wash clothing before reuse.
Eye Contact:
Immediately flush with large amounts of water for at least 15 minutes. Remove contact lenses if easy to do. Continue
rinsing. Immediately get medical attention.
If Swallowed:
Rinse mouth. Do not induce vomiting. Get immediate medical attention.
4.2. Most important symptoms and effects, both acute and delayed
See Section 11.1. Information on toxicological effects.
4.3. Indication of any immediate medical attention and special treatment required
Not applicable
SECTION 5: Fire-fighting measures
5.1. Suitable extinguishing media
In case of fire: Use a carbon dioxide or dry chemical extinguisher to extinguish.
5.2. Special hazards arising from the substance or mixture
Closed containers exposed to heat from fire may build pressure and explode.
Hazardous Decomposition or By-Products
Substance
Condition
Carbon monoxide
During Combustion
Carbon dioxide
During Combustion
Irritant Vapours or Gases
During Combustion
5.3. Special protective actions for fire-fighters
Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and
prevent explosive rupture.
SECTION 6: Accidental release measures