SDS

3M(TM) Bondo Fiberglass Resin for Fiberglass Resin Kit(s) 420, 420C, 420ES, 420K, 420T, 422, 422C
__________________________________________________________________________________________
Page: 6 of 10
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
Heat
Sparks and/or flames
10.5. Incompatible materials
Strong acids
Strong bases
Strong oxidizing agents
10.6. Hazardous decomposition products
Substance
Condition
Hydrocarbons
Not Specified
Carbon monoxide
Not Specified
Carbon dioxide
Not Specified
SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be
present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be
relevant to the material as a whole.
11.1. Information on Toxicological effects
Signs and Symptoms of Exposure
Based on test data and/or information on the components, this material may produce the following health effects:
Inhalation:
Toxic if inhaled. Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache,
hoarseness, and nose and throat pain. May cause additional health effects (see below).
Skin Contact:
May be harmful in contact with skin. Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching,
and dryness.
Eye Contact:
Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.
Ingestion: