MSDS

Page 2 of 3
6. ACCIDENTAL RELEASE MEASURES:
Spill Procedures
Remove all sources of ignition and provide ventilation. Soak up with inert absorbent. Large
spills may be scooped up with non-sparking tools. Place into container for disposal.
7. HANDLING AND STORAGE:
Handling
Use in a well-ventilated area. Do not breathe spray mist. Avoid eye and skin contact. Wash hands well
with soap & water after use. Keep container tightly closed when not in use. Ground container when
transferring product. Do not cut, puncture, or weld on or near empty container.
Storage
Store in a cool location away from heat, sparks and flame sources. Spray mist and vapors are
flammable.
8. EXPOSURE CONTROL/PERSONAL PROTECTION:
EYES
SKIN
VENTILATION
OTHER
Safety glasses/goggles with
side shields.
Rubber gloves.
Fresh air source or
mechanical, as needed.
None known.
9. PHYSICAL & CHEMICAL PROPERTIES:
Appearance:
Clear liquid.
Odor:
Mild ketone odor.
Boiling Point:
133-237 F (56-114 C)
Specific Gravity (H
2
O=1):
0. 9
Solubility in Water:
Slightly soluble.
Melting Point:
NE
Vapor Density (Air=1):
2.1
Vapor Pressure (mm Hg):
NE
Evaporation Rate (Butyl
acetate=1): NE
Volatile Organic Compounds-VOC
(less exempt): 135 g/L
10. STABILITY & REACTIVITY:
Stable: __X_ yes ____ no
Hazardous Polymerization: _____ may occur __X_ may not occur
Incompatible materials:
Acids, alkaline material, amines, strong oxidizing agents.
Conditions to avoid:
Heat, sparks, flames, ignition sources and incompatibles.
Hazardous decomposition
products:
Carbon monoxide, carbon dioxide and nitrogen oxides.
11. TOXICOLOGICAL INFORMATION: Repeated or prolonged skin contact may cause dermatitis in sensitive
individuals.
12. ECOLOGICAL INFORMATION: Possible water pollutant – avoid release to water drainage systems.
13. DISPOSAL CONSIDERATIONS:
Dispose of in accordance with local, state and federal regulations.
14. SHIPPING:
Product ID
Bondini Brush-On Remover Gel - BGR
DOT
Consumer Commodity ORM-D, ID8000.
IATA
Consumer Commodity, Class 9, ID8000 (if under 30 kg G, per box).
IMO
Adhesives containing Flammable Liquids (contains Acetone) in Limited Quantities, Class 3, UN1090, PG II.
MATERIAL SAFETY
DATA SHEET