COMPARISON CHART ABOUT TAPE APPLICATION DOUBLE-SIDED MOUNTING TAPE SUPER STRONG SUPER STRONG Hannam Hi-Tech -1/7-
DOUBLE-SIDED MOUNTING TAPE Hannam Hi-tech Co. Ltd. SUPER STRONG 1. The surface condition determines the performance of the tape. Before the application of the tape, the surface is exposed to various contamination such as dust, moisture and oil. In order to maximize the adhesive performance of the tape, the surface condition is very important. Therefore, there is a need to keep the surface clean.
DOUBLE-SIDED MOUNTING TAPE Hannam Hi-tech Co. Ltd. SUPER STRONG Indoors, 95% level after 2 hours. ☞ After cleaning the surface, it is the same as 95% level when attaching after 2 hours The level of 80% is expected when 4 hours have elapsed indoors, and even less than 50% is expected if more than a day passes. Therefore, it is judged that attaching without washing does not exhibit 50% of the adhesion performance, and it can be easily separated from the attachment site.
DOUBLE-SIDED MOUNTING TAPE Hannam Hi-tech Co. Ltd. SUPER STRONG 2. The conditions for good adhesion performance 1) As in section 1, clean the surface before attaching. 2) After removing the liner of the tape, attach it immediately. (minimize exposure time to airborne dust, etc.) 3) Attach it to the object first, and wait until the adhesive performance is maximized.
DOUBLE-SIDED MOUNTING TAPE Hannam Hi-tech Co. Ltd. SUPER STRONG ② Consider the area of the tape by referring to the allowable weight according to the material of the surface. For example, it can be seen that the allowable range of a tape of a certain size changes with weight. The weight range the tape can tolerate 0.5 lbs 5.0 lbs ②-1. Heavy stuff Heavy NO Heavy Heavier YES YES Increase the amount of tape to be attached to make the area larger and attach it. ②-1.
DOUBLE-SIDED MOUNTING TAPE Hannam Hi-tech Co. Ltd. SUPER STRONG For example, if there are different shaped objects with the same weight (Δ), the amount of tape required for attachment is the same. As shown in the figure below, A did not fall, but B and C will. A B C Tape 4ea Tape 4ea Tape 2ea (sphere shape) ☞ The load on an object is the product of the weight of the object and the length to the distance to the center of gravity of the object. Force (N) α α wt.(Δ) α α β ☞Δxα=Nxβ a.
DOUBLE-SIDED MOUNTING TAPE Hannam Hi-tech Co. Ltd. SUPER STRONG 3. Tape Specifications for Surfaces 1) Tape Size for 1 pound Material Surface Width Length Metal ; Stainless Steel 0.7 inch Glass 0.8 inch Painted Panel 1.0 inch 1.0 inch Plastic ; ABS 1.0 inch Wood 1.2 inch Load 1 POUND For example, a 2.0 lbs frame ① Material check: ABS ② Identify the required quantity of tape : 4ea ③ Tape size : 1in by 0.5 in ; (1 in by 0.5 in) x 4ea = 2.0 lbs ④ After cleaning the surface, attach.
