User guide

1. Draw the phenol structure.
2. Using the Text tool, click below the drawing and type “Phenol” in the text box.
3. Click outside the text box.
To edit the caption, click in the text box with the text tool and begin typing. For more information, see "New lines and
closing text boxes" on page 257.
Formatting
Each new caption or atom label uses default document settings for the font, size, and style of captions and atom
labels. You can change the format by:
Changing the document settings for subsequent drawings in the current document.
Choosing a new format for an individual caption or label from the Text menu or toolbar before you type.
Selecting text and applying a new format to an individual label after you type.
To specify the text settings for new captions and atom labels in the current document:
1. Go to File>Document Settings. The Document Settings dialog box appears.
2. Select Text Captions or Atom Labels category.
3. Select the appropriate options.
4. Click OK. These settings affect all new captions or atom labels in the current document.
You can set the text format for an individual caption or atom label before you type. To set the text format before you
type:
1. Click the Text tool and then click in the document window. A text box appears.
2. Set the text format in one of the following ways:
From the Text menu, choose the format options.
From the Style toolbar, choose the format options.
3. Type the text in the text box.
Note: The format change is applied to the current text only. Any subsequent text you type is formatted according
to the default document settings for the current document.
ChemBioDraw 13.0
Chapter 3: Basic drawings 18 of 401