Setup Instruction Manual

Multi-Appliance Touch Pad

Multi

le Unit Setu

FORCED SCAN

To force a scan for new equipment

Step 1 Turn the touch pad ON

Step 2 Turn the touch pad OFF

and keep holding the ON-

OFF icon until the clock

area shows - - - -.

Release the ON-OFF button and the touch pad will scan for the new unit

and re-initialise.

Step 3 When the time clock returns to normal, turn the touch pad on and check

the all the units have coded successfully. If the units have been allocated

to different zones, turn the zones on to check unit operation.

Step 4 If a unit did not code correctly, restart the process from

CODE / ZONE ALLOCATION OF ADDITIONAL UNITS – Step 2

Step 5 The Forced Scan coding function will allocate the units that have been

manually assigned to the designated area e.g. evaporative air conditioning

E01, E02, E03 or E04 or ducted heating HC01, HC02, HC03 or HC04 etc.

to the relevant zone icon on the touchpad control.

Manufactured by

Climate Technologies

ABN 13 001 418 042

26 Nylex Avenue

Salisbury, SA 5108

Australia