Instruction Manual

Multi-Appliance Comfort Control
Page 7
Navi
g
atin
g
the Controls
USING THE 9 BUTTONS
The following explains the function of each of the buttons:
ON/OFF
• Turns your Bonaire Ducted Reverse Cycle system ON
and OFF. The Comfort Control remembers your SET
TEMP and operating setting and uses them next time
you turn it ON.
• During programming the ON/OFF button selects ON or
OFF for the program period.
• Use to turn ZONES ON and OFF (if fitted, please refer to
the zone operation section of this manual)
▼
▲ BUTTONS
• Press & release ▼ ▲ buttons to increase or decrease
one setting at a time. Settings include day, time,
temperature, fan speed and timer.
• Or, press & hold ▼ ▲ (DOWN/UP) button to
continuously increase or decrease the selected settings.
• The ▼ ▲ buttons are also used to select the different
zones or programs available.
HEAT/COOL/FRESH
AIR
• Press to select from the heating and or cooling choices (in
most cases you will only be able to see the titles for the
appliances that you have installed).
• HEAT Heating Only Mode
• COOL Cooling Only Mode
• HEAT COOL When the air conditioner is operated in
this mode, it will automatically switch between the Heating
and Cooling modes, depending on the room temperature
and set temperature
• COOL FRESH AIR Not used for Bonaire Ducted Reverse
Cycle systems.
• FRESH AIR Not used for Bonaire Ducted Reverse
Cycle systems.