Instruction Manual

Integra
Owner’s Manual
Page 4
KEY OPERATIONAL POINTS
Normally during the first 10 days of operation resins are washed from new
filter material. A slight odour may be present during this period. Performance
of your Bonaire Air-conditioner will improve during this process.
1. BUILDING VENTILATION: Always ensure that adequate windows and doors are open
(to allow hot stale air to be expelled from the building). See page (4).
2. TURNING THE UNIT ON: Press the ON/OFF button. Your air conditioner will operate
on your previous settings. If your previous setting was cooling there may be a three
minute pre-cool delay.
3. COOLING: Press the "COOL` button to switch on or off the cooling.
4. BOOST ON/OFF: Press the "BOOST” button to go to high fan immediately. Press
again and the fan will return to the original setting.
5. TURNING THE UNIT OFF: Press the "ON/OFF" button.
6. COMFORT CONTROLLER LOCATION: Due to the construction of some buildings
there may be some locations within the building where the comfort controller operation
is not effective.