Full Product Manual
6
5. Electrical Connection and Installation
1. Install the cooler on a flat, level surface.
2. Adjustable Up and Down louvre: The Up and Down
Louvres can be adjusted using the protruded tab as
shown in the image by circle.
3. Add clean water into the water tank. Check the water
level window on the front of the cooler to see when the
water tank is full.
4. Plug the unit into a 120 VAC (± 10%) 60 Hz, 1 phase GFCI
protected grounded outlet.
6. Operation
Control Panel
There are 2 control knobs on the Panel. Left knob controls the power and fan speed of the
Unit. The other knob control cool and swing.
No 2, 3 and 4 are high, medium, and low fan speeds.
No 5 - is for the Cool function which switch the pump on.
No 6 - Keeps the pump on and switch on the swing function.
No 7 - is swing only. In this function it switches off the pump.
Review and understand the warnings in the General Safety Information section, page 2
& 3.
Water Level