SDS

Bona Power Plus Hard-Surface Floor Cleaner Antibacterial
Section 6. Accidental release measures
Environmental precautions
Stop leak if without risk. Move containers from spill area. Approach release from
upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash
spillages into an effluent treatment plant or proceed as follows. Contain and collect
spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or
diatomaceous earth and place in container for disposal according to local regulations
(see Section 13). The spilled material may be neutralized with sodium carbonate,
sodium bicarbonate or sodium hydroxide. Dispose of via a licensed waste disposal
contractor. Contaminated absorbent material may pose the same hazard as the spilled
product. Note: see Section 1 for emergency contact information and Section 13 for
waste disposal.
:
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Large spill :
Stop leak if without risk. Move containers from spill area. Dilute with water and mop up
if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and
place in an appropriate waste disposal container. Dispose of via a licensed waste
disposal contractor.
Small spill :
Methods and materials for containment and cleaning up
Section 7. Handling and storage
Advice on general
occupational hygiene
Conditions for safe storage,
including any
incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. Remove contaminated clothing and protective equipment before
entering eating areas. See also Section 8 for additional information on hygiene
measures.
Store in accordance with local regulations. Store in original container protected from
direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials
(see Section 10) and food and drink. Store locked up. Separate from alkalis. Keep
container tightly closed and sealed until ready for use. Containers that have been
opened must be carefully resealed and kept upright to prevent leakage. Do not store in
unlabeled containers. Use appropriate containment to avoid environmental
contamination. See Section 10 for incompatible materials before handling or use.
:
:
Protective measures
Put on appropriate personal protective equipment (see Section 8). Do not get in eyes or
on skin or clothing. Do not breathe vapor or mist. Do not ingest. If during normal use
the material presents a respiratory hazard, use only with adequate ventilation or wear
appropriate respirator. Keep in the original container or an approved alternative made
from a compatible material, kept tightly closed when not in use. Keep away from alkalis.
Empty containers retain product residue and can be hazardous. Do not reuse container.
:
Precautions for safe handling
Section 8. Exposure controls/personal protection
Control parameters
Occupational exposure limits
Date of issue/Date of revision
:
2020-02-14 Date of previous issue : No previous validation Version : 1 4/12