Technical data

Bona
®
Conditioning Pad
Technical data sheet
Rev 11 /10
This data sheet replaces all previous versions page 1/1
Sanding
This unique Pad out - performs any abrasive or conditioning material used in the wood flooring
industry today for abrading wood floors between finish coats. The Conditioning Pad is designed
for use on waterborne finishes but works equally well on solvent -b ased finishes. The conforming
nature of the pads makes them ideal for most wood floor finish surfaces insuring optimum
bonding and the smoothest possible final coat. Conditioning Pads are used with siafast Delta
Sheets for additional abrasion to eliminate grain raise.
Will not leave unslightly scratches
Abrades finish surfaces thoroughly for uniform appearance and good adhesion.
Conforms to uneven surfaces – no shiny seams or low areas.
Will not mar or burn the finish surface.
Cleans easily by vacuumin g.
Long wear life compared with other abrasives.
Glides smoothly over finish surfaces.
Available in 16” or 20” diamaters.
10 pads per package.
Intercoat abrasion for sealers and finishe s.
Excellent for cleaning floor prior to recoat.
This Conditioning Pad from Bona is the new standard for surface conditioning of waterborne
and solvent - based sealers and finishes. It is ideal for deburring, cleaning and smo othing wood floor
sealers and finishes prior to the application of additional coats. When used on waterborne sealers
with siafast Delta Sheets, a smooth surface is prepared for finish coats while controlling grain raise.
Two Pads can be used under the buff er. This allows air to circulate and helps eliminate friction
heat that contributes to gumming and loading of the Conditioning Pad and the Delta Sheets.
Item# Size/Grit #/Case Lbs./Case
AAS19522203 16”/320 10 4
AAS19522101 20 ”/320 10 4
Order Information
Directions
Technical data
Recommended Use