Technical data
Bona
®
Pro Series Stone, Tile &
Laminate Floor Refresher
Technical data sheet
Rev
8
/10
This data sh
eet replaces all previous
versions
page
1/1
Floor Care
Professional
formula refresher provides a clear, highly durable gloss to all sealed hard surface flooring including:
laminate floor
ing, vinyl, no
-wax linoleum, terrazzo, unglazed tile (ceramic, Mexical Saltillo, quarry), stone, and
sealed porous marble. Waterborne acrylic formula fortified with urethane.
Professional f
ormula
Keeps floors looking new
Quick and easy application
Drie
s in one hour
Waterborne acrylic formula with urethane
Non
-
toxic
GREENGUARD certified for indoor air quality
hour meter
Physical Characteristics:
Ingredients
–
Water,
acrylic polymer, urethane, wax, Diethylene Glycol Monoe
thyl Ether
Color
–
Milky white
(wet)
pH
–
8.0
Solids
–
10%
-
12%
Viscosity
–
(#4 Ford cup @ 25º C) 10
-
12
seconds
Density
–
8.3
9
lbs./gallon (1.0
1
S.G.)
Packaging
–
1 quart plastic bottle
Gloss Level
–
(60º)>85
Odor
–
Non
-
Offending
Flash Point
–
None
Stab
ility
–
1 year shelf
life
VOC
–
Does not exceed 2%
Application Characteristics:
Drying Time
– 1
hour
Application Tools
–
Bona
®
Microfiber Applicator Pad
Coverage
–
500 sq. ft. per bottle
Clarity
–
Clear when dry
Leveling
–
Excellent
Percent Cured After 2
4 hours
–
90%
Defoaming
– Excellent
Max. Cure
–
100% after 1 week
Use every 2
-
3 months on all sealed hard surface flooring
BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEET.
1.
Remove furniture, rugs, etc. Vacuum, sweep or dust mop, then thoroughly clean with Bona Stone, Tile &
Laminate Floor Cleaner and the green Microfiber Cleaning Pad on your Bona Mop. Allow the floor to dry.
2.
Gently rock product back and forth to mix. Sli
ghtly dampen the cream Microfiber Applicator Pad with water and
attach to mop. Squirt Stone, Tile & Laminate Floor Refresher onto the floor and spread. Work in sections small
enough to keep the Applicator Pad wet. Continue working in sections until the ent
ire floor is finished. Rinse
Applicator Pad with water.
3.
Allow to dry at least 1 hour before walking on the floor. For a glossier floor, a
second coat may be applied after 2 hours. Allow 24 hours before heavy traffic.
For best results:
Always test in a
n inconspicuous section of the floor before use. Coverage should be 500
square feet per bottle. Do not apply the product too thin or st
r
eaking will occur. Coat the entire floor to ensure an
even appearance.
1.
Clean
2.
Squirt and Spread
3.
Allow to Dry
Clean
-
Up: Clean all tools and equipment with warm water.
Item #
:
WT760051164
#/Case
:
8
Order Information
Maintenance
Directions
Technical data
Recommended Use