Technical data
Bona
®
Pro Series Hardwood
Floor Refresher
Technical data sheet
Rev
8
/10
This data sheet replaces all previous
versions
page
1/1
Floor Care
Professional formula refresher provides a clear, highly durable gloss to polyurethane finished wood floors
that are dull, worn, scr
atched, or shows signs of wear. This non
-
toxic, waterborne formula restores the
beauty of wood floors, leaves no build
-
up, and is recoatable.
Professional f
ormula
Specially formulated for use on hardwood floors
Restores shine
Easy application
Urethane
maintenance coating
Dries in one hour
Non
-
toxic
Recoatable with finish
GREENGUARD certified for indoor air quality
hour meter
Physical Characteristics:
Ingredients
–
Water,
polymeric resins, Diethylene Gylcol Monoethyl Et
her
Color
–
Milky white (wet)
pH
–
8.0
Solids
–
10
-
12%
Density
–
8.3
9
lbs./gallon (1.0
1
S.G.)
Gloss Level
–
(60º
)>80
Odor
–
Non
-
Offending
Flash Point
–
None
Stability
–
1 year shelf
life
VOC
–
Does not exceed
2%
Packaging
–
1 quart plastic bottle
Ap
plication Characteristics:
Drying Time
–
1 hour
Application Tools
–
Bona
®
Microfiber Application Pad
Coverage
–
500 sq. ft. per quart
Clarity
–
Clear when dry
Leveling
–
Excellent
Percent Cured After 24 hours
–
90%
Defoaming
–
Excellent
Max. cure
–
100% af
ter 1 week
All types of unwaxed, residential and commercial polyurethane finished wood floors
that are dull, worn,
scratched, or show signs of wear
Can be used on most “aluminum oxide” and “ceramic” type UV finishes
BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEET.
1.
Remove furniture, rugs, etc. Vacuum, sweep or dust mop, then thoroughly clean with Bona Hardwood
Floor Cleaner and the green Microfiber Cleaning Pad on your Bona
Mop. Allow the floor to dry.
2.
Gently
rock product back and forth to mix. Slightly dampen the cream Microfiber Applicator Pad with water and
attach to mop. Squirt product onto the floor and spread. Work in sections small enough to keep the
Applicator Pad
wet. Smooth with the grain. Continue working in sections until the entire floor is finished.
Rinse Applicator Pad with water.
3.
Allow to dry at least 1 hour before walking on the floor. For a glossier
look, a second coat may be applied after 2 hours. All
ow 24 hours before heavy foot traffic.
Clean
-
Up: Clean all tools and equipment with warm water.
Item#
:
WT760051163
#/Case
: 8
Order Information
Maintenance
Directions
Technical data
Recommended Use