Technical data
Bona Sport
®
Sport Seal
Technical data sheet
Rev
03/11
This data sheet replaces all previous
versions
page
2/2
SEALING: 1.
After preparing surface, apply Bona SPORT SEAL at 500
-
600 sq. ft. per gallon with
heavy weight T
-
bar.
2.
Avoid leaving puddles of excessive amounts of sealer.
3.
Allow to
thoroughly dry with adequate ventilation (
8-
12
hours). High humidity and/or low temperatures will
extend drying time; increased ventilation and air flow will reduce dry time (recomme
nded conditions
of 65
-
80
°F (18
-
27
° C), 40
-
60% relative humidity).
4.
Abrade surface thoroughly with Bona
®
Conditioning Pads or used 120
-
grit screens before finishing.
5.
Vacuum thoroughly and tack with
water.
6.
Apply a Bona Sport
®
oil
–
modified or waterbor
ne finish.
INTERCOAT ABRASION FOR FLOORS WITH GAMELINES:
Apply gamelines over the
second
coat of
Bona
Sport
®
S
ealer
. Before applying gamelines, abrade with 120
-
grit screens and vacuum
and tack thoroughly. Note: If paint will not be applied for 24 hours o
r longer, floor must be re
-
abraded to ensure proper adhesion. Apply gamelines using Bona CourtLines
®
sport floor paint. IF
USING ANOTHER MANUFACTURER’S PAINT, BEFORE APPLYING GAMELINES, ALWAYS
PREPARE A SAMPLE OR TEST AREA TO DETERMINE COMPATIBILITY AND AD
HESION.
After applying gamelines using CourtLines
®
paint, once per day, abrade entire floor with Bona
®
Conditioning Pads or used 120 or 150 grit screens. Always vacuum and tack thoroughly after
abrading. Apply finish coat within 24 hours.
INTERCOAT ABRASI
ON FOR FLOORS WITHOUT GAMELINES:
Abrade between all sealer and
finish coats using Bona Conditioning Pads or 120 to 150 grit screens to ensure adhesion. Always
vacuum and tack thoroughly after abrading.
DANGER: RAGS, STEEL WOOL OR WASTE SOAKED WITH SPORT S
EAL MAY
SPONTANEOUSLY CATCH FIRE IF IMPROPERLY DISCARDED. IMMEDIATELY AFTER EACH
USE, PLACE RAGS, STEEL WOOL OR WASTE IN A SEALED, WATER
-
FILLED METAL
CONTAINER.
CLEAN
-
UP:
Clean application tools and equipment with mineral spi
rits.
STORAGE AND DISPOSAL:
Store at room temperature. Keep container closed when not in use.
Do not store
above 100
° F (38° C). Do not transfer contents to other containers for storage and
disposal. In case of spillage, absorb with inert material. Dispose of contaminated absorbent,
container and unused contents in accordance with local, state and federal regu
lations.
Item#
Size
#/Case
SB750055109
5 Gallon
1
Order Information
Maintenance
Finishing