Technical data

ManualsBrandsBona ManualsBusiness equipmentMiniEdge

DriFast

Stain

Technical data sheet

Rev

This data sheet replaces all previous

versions

page

1/2

Finishing

An oil

modified stain that dries and is recoatable in two hours. A premium quality quick

drying stain

r interior hardwood floors, DriF

ast

Stain’s advanced technology formula provides speed and

high performance for hardwood floor finishing professional

s. Compatabile with all Bona

waterborne systems and all other Bona

finish systems.

2 hour dry time*

No bleed back

Penetrates, stains, and seals bare wood

800

1,000 sf/gal coverage rate

Available in 14 wood tones and white

All stain colors can be bl

ended, offering an endless color palette

Clean up with mineral spirits

Low odor

Easy touch

ups (mineral spirits for thinning dark or heavy spots)

*6 hours for white under ideal conditions (6

80ºF,

% relative humidity).

Physical Characteristics:

Ingredients

–

Wood tones: Oil

modified resins, mineral spirits (solvent), pigments, driers

White: Oil

modified resins, mineral spirits (solvent), Titanium Dioxide, fillers

Color

s –

Wood tones:

Natural, Golden Oak, Nutmeg, Ea

rly American, Provincial, Special Walnut,

Rosewood, Red Mahogany, Jacobean, Ebony, Medium Brown, Antique Brown, Puritan pine,

Cherry.

Pastel

: White (Not recommended on white oak due to excessive color variation).

Solids

–

40%

Density –

Wood tones: 7.2

7.5 lbs

/gallon (0.86

0.90 s.g.), White: 8.7

9.0 lbs/gallon (1.04

1.8 s.g.)

US Regulatory

VOC

–

550 g/L

Odor

–

Mild solvent odor

Stability –

One y

r shelf life in unopened container

Flashpoint

–

103ºF (39ºC)

Packaging

–

quart cans

gallon cans

Application Characteristics:

Clarity –

Semi

transparent (dry)

Drying Time

–

2 hours

for wood tones

, 6 hours minimum for White, under ideal conditions (6

80º

% relative humidity).

Coverage

–

800

1,000

square feet per gallon

Application Tools

– C

lean cloths, brush, cut

in pad

Apply only over bare wood

Prepares the surface for a topcoat of

Bona

waterborne or any other Bona

finish

BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEETS.

FOR TECHNICAL ADVICE:

Call Bona US at 800

872

5515

COMPATIBILITY:

Bona does not recommend using white stain on white oak due to excessive

color variation. Stain, sealer and finish results may vary widely depending on the wood species,

specially on oily and resinous Exotics. ALWAYS PREPARE A SAMPLE OR TEST AREA TO

DETERMINE COMPATIBILITY, APPEARANCE AND DESIRED RESULTS.

SANDING AND PREPARATION OF NEW FLOORS: 1.

Sand and prepare floor using accepted

industry association methods.

Make

your final cut with 80

100 grit paper and screen to 80

100

grit.

Use a Tampico Brush on a buffer and vacuum thoroughly.

Tack with a dry Bona

Microfiber Mop or cloth to remove dust.

Apply stain system.

THE BONA

DRIFAST

STAIN SYSTEM:

Bona Dri

t Stain is a redesolving stain designed to

penetrate, stain and seal bare wood. Bona Dri

ast Stain is designed to work with all Bona finishes.

Colors may be

blended with all other Bona DriF

ast Stains. Visit www.bona.com for additional

product information.

Directions

Technical data

Recommended Use