Technical data
Bona Sportive
™
Finish
Technical data sheet
Rev
11
/10
This data sheet replaces all previou
s
versions
page
1/2
A premium VOC compliant, two
-
component waterborne wood floor sport finish. Specifically
formulated for professional use on maple floors, providing a tough, high
-
build urethane finish.
GREENGUARD
Children & Schools
SM
Certified
Slightly amber
Provides
excellent chemical resistance
Protects against perspiration and routine cleaning
Easy to maintain
Available in gloss
MFMA approved
Virtually odorless
Fast drying
–
Approximately 2
-
3 hours
Nonflammable
Water clean
-
up
Will adhere to most solvent
-
based
and waterborne finishes after proper preparation, drying and
curing times
Physical Characteristics:
Ingredients
–
Water, polymeric resin, propylene based glycol ethers and dipropylene glycol
monomethyl ether
Color
–
Milky
, off
white (wet)
pH
–
7.8
Solids
–
32
%
Viscosity –
(#4 Ford cup @ 25
°
C) 18
.5
seconds
Density –
8.
66
lbs./gallon (1.0
4
S.G.)
US Regulatory
VOC
–
200 g/L
Gloss Level
–
(60
°
)
90
Odor
–
Non
-
offending
Stability –
1 year shelf life in unopened container
Pa
ckaging
– 5-
gallon plastic pail
·
Comes complete with crosslinker
Application Characteristics:
Clarity –
Clear when dry
Leveling
–
Excellent
Defoaming
–
Excellent
Drying Time
–
2
-
3 hours
Coverage
–
500
-
600 square feet per gallon
Percent Cured After 24 H
ours
–
70%
; after 72 hours
–
90%
Maximum Cure
–
100% after 1 week
Basketball courts
Volleyball courts
Racquetball
,
squash
and badminton
courts
Multi
-
purpose gym
,
stage, aerobic and dance floors
BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEET FOR THIS
PRODUCT.
FOR TECHNICAL ADVICE:
Call Bona US at 800/872
-
5515
COMPATIBILITY:
Bona Sportive will adhere to most stains, paints, sealers and finishes after
proper preparation and dr
y times. Stain, sealer, paint and finish results may vary widely depending
on the wood species, especially on oily and resinous types. ALWAYS PREPARE A SAMPLE OR
TEST AREA TO DETERMINE COMPATIBILITY, APPEARANCE AND DESIRED RESULTS.
SANDING AND PREPARATION
OF NEW FLOORS: 1. Sand and prepare floor using MFMA
-
accepted methods.
2.
Make your final cut with 100
-
120 grit paper. Screen with 100
-
120
-
grit screen.
3.
Vacuum thoroughly.
4.
Dry tack thoroughly.
5.
Apply sealer and finish system (see finish
directions).
THE SPORTIVE FINISH SYSTEM:
Bona Sportive is a 4 coat system, 1
-
2 coats of a Bona Sport
Sealer (follow sealer directions), CourtLines pai
nt (if desired), and 2
-
3 coats of Bona Sportive.
Directions
Technical data
Recommended Use
Finishing