Technical data

Bona Pacific Filler
™
Technical data sheet
Rev 11 /10
This data sheet replaces all previous versions page 2/2
Finishing
MIXING INSTRUCTIONS: Stir thoroughly before using. One to two cups of water may be added
per gallon.
FILLING: Apply Bona Pacific Filler 600-800 sq. ft. per gallon before final sanding with the drum or
belt machine. Thoroughly vacuum dust from cracks and holes before filling. Work the filler as deep
as possible into cavities. To fill and level larger holes or deeper cracks, several applica tions may b e
required. It may be necessary to trowel-fill the entire floor, depending upon the extent of cracks
between strip or parquet floors. Allow sufficient drying time: 30 minutes to 2 hours before final
sanding. Higher humidity or cooler conditions will increa se the drying time.
Bona Pacific Filler is tintable with Universal Color tints. Do not exceed more than 1 ounce of tint per
gallon of filler. Use the Bona Pacific Filler that is closest in color to the floor being finished.
C LEAN UP: Clean tools with water
STORAGE AND DISPOSAL: Store at room temperature. Keep container closed when not in use.
Do not store above 100 ° F (38° C).
Item# Size/Color #/Case
AF0001822 Quart – Red Oak 8
AF0001823 Qua rt – White Oak 8
AF0001826 Quart – Ash/Maple/Pine 8
AF0001827 Quart – Brazilian Cherry 8
AF0001829 Quart – American Cherry 8
AF0001831 Quart – Walnut 8
AF0001539 Gallon – Red Oak 2
AF0001824 Gallon – White Oak 2
AF0001537 Gallon – Ash/Maple/Pine 2
AF0001 828 Gallon – Brazilian Cherry 2
AF0001830 Gallon – American Cherry 2
AF0001832 Gallon – Walnut 2
AF0001821 3.5 Gallon – Red Oak 1
AF0001825 3.5 Gallon – White Oak 1
AF0001820 3.5 Gallon – Ash/Maple/Pine 1
Order Information
Maint enance