Technical data

Bona Pacific Filler
™
Technical data sheet
Rev 11 /10
This data sheet replaces all previous versions page 1/2
Finishing
A waterborne compound specifically designed for filling cracks, holes, chips, gouges and broken
edges in hardwood floors prior to finishing. Pacific Filler’s high solid content formula is ready to
use, trowelable direct from pail, or can be thinned with water for trowel filling.
Ready to use – easy to spread for trowel filling
Ideal for spot filling
May be thinned with water
Safe to use, nonflammable
Sands easily
Fills the soft grain
Helps minimize grain raise
Available in six wood tones: Red Oak, White Oak, Ash - Maple - Pine, Brazilian Cherry, American
Cherry, and Walnut
Accepts stain like wood
Can be tinted with Universal Color tints to match custom or exotic woods
Dries with minimum shrinkage
Excellent adhesion, bonds tightly to wood
Tools can be cleaned with water before compound dries
Physical Characteristics:
Ingredients – Inorganic fillers, water, binders, pigments
Colors – Red Oak, White Oak, Ash - Maple - Pine, Brazilian Cherry, American Cherry, Walnut
Odor – Mi ld latex odor
Solids – 65 - 75%
Density – 13.3 lbs/gallon (1.60 S.G)
US Regulatory VOC – 250 g /L
Stability – 1 year shelf life in unopened container
Application Characteristics:
Drying Time – 30 minutes to 2 hours, depending on environmental condition s (temperature and
humidity), coverage rate, and size of cracks and holes.
Coverage – 600 - 800 square feet per gallon
Application Tools – Putty knife, Bona
®
Trowel
Packaging – Quart plastic container: Red Oak, White Oak, Ash - Maple - Pine, Brazilian Cherry,
A merican Cherry, Walnut
1 Gallon plastic container: Red Oak, White Oak, Ash - Maple - Pine, Brazilian Cherry, American
Cherry, Walnut
3- 1/2 Gallon plastic container: Ash - Maple - Pine, Red Oak, White Oak
Apply over bare wood before final sanding cut
Formulated for use with Bona
®
Drifast
®
Stain, all Bona
®
waterborne and all other Bona
®
finishing
systems.
Always prepare a test sample on a small area to determine compatibility and color acceptance
BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEETS.
FOR TECHNICAL ADVICE: Call Bona US at 800 - 872 - 5515
COMPATIBILITY: Bona Pacific Filler will accept most stains, sealers and finishes in the same
manner as most woods. ALWAYS PREPARE A TEST OR SAMPLE AREA TO DETERMINE
COMPATIBILITY. Do not use wood bleach over Bona Pacific Filler as it may damage the filler.
SANDING AND FINISHING NEW FLOORS: Sand and prepare floor using accepted industry
association methods.
THE PACIFIC FILLER SYSTEM: Bona Pacific Filler™ brand hardwood floor filler is a high solids
content, waterborne compound specifically designed for filling cracks, holes, chips, gouges and
broken edges in hardwood floors prior to finishing. This product has excellent adhesion, staining
and f inishing properties with minimum shrinkage.
RECOMMENDED APPLICATORS: Stainless steal trowel, Putty knife
Directions
Technical data
Recommended Use