Technical data
Bona Traffic
®
Anti Slip
Technical data sheet
Rev
05/11
This data sheet replaces all previous
versions
page
1/2
Finishing
Bona
Traffic
®
Anti
-
Slip
is a 100% polyurethane 2
-
component waterborne finish offering exceptional
durability and protection for hardwood floors. It has all the features of Bona Traffic
®
but with the additional
benefit of being formulated to meet the high
est standards for slip resistance in workplaces and other
situations with an increased risk of wet spills. With its high friction, Bona Traffic Anti
-
Slip is an ideal choice
for stairs, nurseries, kitchens and similar locations.
Meets the ADA recommendati
on for accesible routes and ramps according to ASTM 2047
Meets the German Industrial Norm for slip resistance DIN 51 130 with a rating of R10
Clear and colorless, which highlights the true color of stained or natural wood floors. Will not change
color over
time, allowing for easy touch
-
up
GREENGUARD certified for indoor air quality
No sealer needed over a stained floor
Exceptional build with excellent flow and leveling
Fast drying
-
Approximately 2
-
3 hours
Nonflammable with a non
-
offending odor
Water clean
-up
Physical Characteristics:
Ingredients
–
Water, polymeric resin, dipropylene glycol monomethyl ether, and amorphous silica.
Color
– Milky white (wet)
pH
–
7.5
-
7.9
Solids
–
34
%
(with hardener)
Density
–
8.70
lbs/gallon (1.
04
S.G.)
US Regulatory
VOC
Compliant –
210 g/L
Coefficient of Friction
= 0.8
Gloss Level
–
(60
°
)
–
Approximately 25
Odor
–
Non
-
offending
, slight ammonia
Stability
–
One
year shelf life in unopened container
Packaging
–
1
-
gallon plastic bottle
Application Characteristics:
Clarity
–
Clear
and colorless
when dry
Leveling
–
Ex
cellent
Defoaming
–
Excellent
Drying Time
– 2-
3 hours
Pot Life
–
THE FINISH/HARDENER MIXTURE MUST BE USED WITHIN 4 HOURS AFTER IT IS
MIXED. Product properties are diminished after 4 hours. The finish and hardener can only be mixed
one
time
.
Coverage
–
350
-
400
square feet per gallon
Percent Cured After 24 Hours
–
75
%
,
72 hours
–
90%
Maximum Cure
–
100% after 1 week
Commercial and reisdential use including shopping malls, restaurants, offices, retail stores, theater
stages, ho
spitals, schools, and nursing homes, where slip resistance is required.
BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEETS.
FOR TECHNICAL ADVICE: Call Bona US at 800/872
-
5515
COMPATIBILITY
: Bona Traffic
Anti
-
Slip
will adhere to most stains and finishes after proper preparation
and dry times. Stain, sealer and finish results may vary widely depending on the wood species, especially
on oily and resinous Exotics. ALWAYS PREPARE A SAMPLE OR TEST AREA TO DETERMINE
COMPATIBILITY, APPEARANCE AND DESIRED RESULTS.
SANDING AND PREPARATION OF NEW FLOORS: 1.
Sand and prepare floor using accepted
industry association methods.
2.
For a stained floor, make your final cut with 80
-
100 grit paper and
screen to 80
-
100 grit. For an unstained floor, make your final cut with 80
-
100 grit paper and disc/screen to
120
-150 grit. This burnishing will reduce the amount of grain raise.
3.
Use a Tampico Brush on a buffer
and vacuum thoroughly.
4.
Tack with a dry Bona
®
Microfiber Mop or cl
oth.
5.
Apply finish system.
THE BONA TRAFFIC
®
ANTI
-
SLIP
FINISH SYSTEM:
Apply a Bona sealer or Bona stain and 2 coats of
Bona
Traffic
Anti
-
Slip
. Follow label directions. Adding a third coat of Bona Traffic
Anti
-
Slip
is
recommended in heavy
-
traffic
commer
cial and residential areas. Visit www.bona.com for additional
product information.
RECOMMENDED APPLICATORS:
Bona
®
Floor Coater, Bona
®
Roller, Bona
®
Cut
-
In pad.
NOTE: Use a clean applicator for sealer and a separate clean applicator for finish.
Directions
Technical da
ta
Recommended Use