Technical data
Bona Traffic HD
™
Technical data sheet
Rev
09
/11
This data sheet replaces all previous
versions
page
1/2
Finishing
Bona Traffic HD™ is for hardwood floor owners with an uncompromising attitude towards durability, being
green and looking beautiful. When the wood matters
-
Bona Traffic HD™.
Significantly outperforms all urethane finishes, including Bona Traffic
®
, in
durability at 24 hours
Unsurpassed scuff, scratch and chemical resistance at full cure
Very low VOCs
-
less than 125
Very low odor
Clear and colorlesss, which highlights the true color of stained or natural wood floors. Will not change
color over time,
allowing for easy touch
-
up
GREENGUARD
Indoor Air Quality Certified
®
No sealer needed over a stained floor
Exceptional build with excellent flow and leveling
Available in Commercial Satin, Commercial Semi
-
Gloss, and Commercial
Extra Matte
Fast drying
–
app
roximately 2
-
3 hours
Nonflammable with a non
-
offending odor
Water clean
-
up
Physical Characteristics:
Ingredients
–
Water, Polymer(s), and amorphous silica
Color
–
Milky white (wet)
pH
–
7.9
Solids
–
34% (with hardener)
Densi
ty
–
8.7
0
lbs./gallon (1.0
4
S.G.)
US Regulatory
VOC Compliant
–
125
g/L (with hardener)
Coefficient of Friction
-
= 0.5
Gloss Level
–
(60
°
)
– 7-
10 for Commercial Extra Matte,
15
-
20 for Commercial Satin
,
40
-
45 for Commercial Semi
-
Gloss
Odor
–
Very slight non
-
offensive odor
Stability
–
1 year shelf life in unopened container
Packaging
–
1
-
gallon plastic bottle
Applic
ation Characteristics:
Clarity
–
Clear
and colorless
when dry
Leveling
–
Excellent
Defoaming
–
Excellent
Drying Time
–
2
-
3 hours
Pot Life
–
THE FINISH
/HARDENER MIXTURE MUST BE USED WITHIN
4 HOURS AFTER IT IS
MIXED. Product properties are diminished after
4 hours. The finish and hardener can only be mixed
one
time
.
Coverage
–
350
-
400
square feet per gallon
Percent Cured After 24 Hours
–
80
%
,
72 hours
–
90%
Maximum Cure
–
100% after 1 week
Commercial and residential use inc
luding shopping malls, restaurants, offices, retail stores, theater
stages, hospitals, schools, and nursing homes
BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEETS.
FOR TECHNICAL ADVICE:
Call Bona US at 800/8
72
-
5515
SANDING AND PREPARATION OF NEW FLOORS:
1.
Sand and prepare floor using accepted industry
association methods.
2.
For a stained floor, make your final cut with 80
-
100 grit paper and screen to 80
-
100 grit.
For an unstained floor, make your final cut
with 80
-
100 grit paper and disc/screen to 120
-
150
grit. This burnishing will reduce the amount of grain raise.
3.
Use a Tampico Brush on a buffer and
vacuum thoroughly.
4.
Tack with a dry Bona
®
Microfiber Mop or cloth.
5.
Apply finish system.
THE BONA T
RAFFIC
HD
™
FINISH SYSTEM:
Apply a Bona sealer or Bona stain and 2 coats of Bona
Traffic
HD
. Follow label directions. Adding a third coat of Bona Traffic
Commercial
is recommended in
heavy
-
traffic commercial and residential areas. Visit www.bona.com for additional p
roduct information.
RECOMMENDED APPLICATORS:
Bona
®
Floor Coater,
Bona
®
Roller, Bona
®
Cut
-
In pad.
NOTE: Use a clean applicator for sealer and a separate clean applicator for finish.
MIXING INSTRUCTIONS:
SHAKE WELL BEFORE USING. DO NOT THIN. DO NOT ADD WAT
ER.
1.
Shake Bona Traffic finish (Part A) well for 30 seconds.
2.
Add Bona Traffic Hardener (Part B) to finish
Directions
Technical data
Recommended Use