Operating instructions

-- 24 --
Multi Format LCD Monitor
Multi Monitor Control can be operated by exclusive use Adaptor(RS-232C <-> Serial Conversion)
Converting device and by PC where exclusive use program (Wall System Controller) is installed.(Option)
Adaptor(RS-232C <-> Serial Data)Converting Device
PC (Control S/W)
BWC-100
A
8-1. Multi Monitor Cont r ol (through Update Port)
.
8. Program Update Port(RJ-11)
Update Port(RJ-11) can be used in a situation as below.
1) To modify Firmware program
2) To control Color Temperature, Gamma Setting for LCD
3) To control Multi Monitors using PC Exclusive use program “Wall System Control” on PC
!
Please consult w it h technician for Program Update or for Serial Por t
use. I ncorr ect use of this por t may cause damage or malfunction.
1 2 3 4 5 6
Update (RJ-11)
Update Terminal Assignment
1 PIN NC 4 PIN GND
2 PIN RX+ 5 PIN TX+
3 PIN RX- 6 PIN TX-
1 2 3 4 5 6