Operating instructions

-- 21 --
Menu Setup
▪ GPI Cont rol :
Used to select external control terminal ON/OFF. It is
not possible to control through Remote terminal from
outside or external area when it is OFF
▪ GPI Port 1,2,3,4,5,6,7
Used to select each terminal of external Remote
Control Terminal (RJ-45).
However, GPI Port7 is fixed as Key Standby. For detailed
information, please refer to category 8-1,2,3
▪ Rem ote I D Number : Used to set own number for monitor in case IR remote Control (Option)
▪ Ser ial Remote : Select whether use external Serial Port control or not.
I f Serial Remote is on, I R remote controller and Key do not wor k
To terminate Serial Remote Status (Update, Remote On), press Menu button for 3
seconds.
6-7. GPI PORT Setup
!
▪ Function 1,2,3,4 : Used to select the functions to be
assigned to individual buttons to F1, F2, F3, F4
(For detailed information, please refer to category 3-4)
▪ Front Button Lock : Sets ON/OFF lock function of
front key buttons.
▪ Setup Load : used to change product setup status.
- Factory Mode: used to return to the factory default.
- User 1,2,3 Mode : Menu Setting is transferred to the
Menu of 1,2,3 to be saved by user
▪ Setup Load : Used to change Setup.
- Factory Mode: Used to return to factory default.
- User 1,2,3 mode : Menu Setting is transferred to the Menu of 1,2,3 to be saved by user.
▪ Set up Save : Used to save current Menu setting. User 1,2,3 can be used by Setup Load.
▪ Firmw ar e Ver sion : Displays F/W Version and H/W Version.
▪ Operating Time : Displays operating time of the product.
Note) While Back Light is adj usted, LCD panel requires enough time to be
stable adj usting Phase (brightness). I t requires mor e than 30 minutes.
!
6-8. SYSTEM