Operating instructions

-- 19 --
Menu Setup
▪ Color Temper ature
: Sets color temperature on screen among
3200°K,5400°K,6500°K, 9300°K의
▪ Adj ust Temperature
: Activates when User is set in Color Temperature
RGB Gain and Bias are possible to control
▪ R,G,B Gain : Control each R,G, B Gain in USER mode
▪ R,G,B Bias : Control each R,G,B Bias in USER mode
▪ Marker 16:9
Used to set the type of Marker in 16:9 HD Signal.
-> 4:3,15:9,14:9,13:9,1.85:1,2.35:1,User,Off
▪ Safety Area 16:9
Used to set the safety area in 16: 9 HD signal
-> EBU ACT 16:9/14:9/4:3, EBU GRA 16:9/14:9/4:3,
Off, 80% ,85%,88%,90% ,93%,95%
▪ Safety Area 4:3
Used to set the safety area in 16:9 HD signal input
-> EBU ACT 16:9/14:9/4:3, EBU GRA 16:9/14:9/4:3,
Off, 80% ,85%,88%,90% ,93%,95%
▪ Center Mar ker : Center Marker On/Off
6-3. COLOR
6-4. MARKER
▪ Timecode Display : Timecode Display ON/OFF
▪ Timecode Position : Used to set position of Time
Code.
▪ Menu Display Time : Sets Menu and
Information.
-> Select one of off, 0(continute)~60
seconds.
▪ Menu Blend : Set transparency of menus and
indication windows on the screen
-> Selects 0~15 levels
6-5. OSD
▪ Marker Color : Selects Marker Color.-> Black, Red, Green, Blue, White, Gray
▪ Marker Thickness : Set Marker Thickness as Pixel unit. (1~10 Pixels)
▪ Marker Back Color : Sets background transparency between Normal and Half, excluding
Safety area. -> Normal, Half
▪ User Mar ker H1,2/ V1,2 : Sets H,V Position of User Marker
(Depending on inch, user can be set the maximum resolution which are supported in the LCD Panel.)