Operating instructions

-- 18 --
Menu Setup
Sets Screen size mode or display status.
▪ PIP & PAP Main : Selects input of Main.
▪ PIP & PAP Sub : Selects input of Sub.
▪ Dual Display Type : In the Dual Display Mode, you can
adjusts position and sized of picture.
▪ PiP Position : You can select position of Sub.
▪ W .F Display Mode : Selects W.F display Mode.
▪ W .F Line Select : Display selected line’s W.F and you can select the line by UP ▲ DOWN ▼ button.
▪ W .F Select : Used to display desired Video waveform -> Y(Green), Cr(Red), Cb(Blue)
▪ W .F Position : Used to set the position of Waveform Display -> Left Top, Left Bottom, Right Top, Right
Bottom
▪ Vector Position : Used to set the position of Vector scope among->Left Top. Left Bottom. Right Top.
▪ W .F & Vector Blend : Used to adjust transparency of W.F and Vector scope.
6-2-1. Display
6-2-2. Display Setup
▪ Video Range Check : Video Range Check On/Off
▪ Y Range Max : Used to set Maximum value of Y.
▪ Y Range Min : Used to set Minimum value of Y.
▪ C Range Max : Used to set Maximum value of C.
▪ C Range Min : Used to Set Minimum value of C..
▪ Blink Color : Used to set the Blink Color when the Video Range Check On. There are Black/ Blue/
Green/ Red.
▪ Blink Time : Used to set the Blink time when the Video Range Check ON.
▪ Focus Peaking Display : Camera Focus Assistance On/Off.
▪ Peaking Color : Used to set the peaking color of Focus Assistance.
▪ Peaking Width : Used to set the peaking width of Focus Assistance.