Operating instructions

-- 17 --
Menu Setup
This Menu is displayed VGA Mode Only.
▪ V -Position ▪ H -Posit ion : You can adjust V and H
position in PC-RGB input mode.
▪ Phase: You can adjusts Phase
▪ Auto Adj ust : You can adjust screen position
automatically..
▪ PC SCAN : You can select display mode among Fill and
Aspect.
▪ Aspect : Sets picture ratio as 16:9 or as Native
ration in SD mode, 2k mode.
▪ Pixel to Pixel(1:1) : This function is available only in
7” and 20” model. Displays native signal inputted in HD-
SDI, 1920 x 1080 without scaling down. The active display
can be set to Left Upper, Right Upper, Left Bottom, Right
Bottom, and Center.
6-1-2. VGA Display Setup
6-2. Display
▪ Anamor phic : Makes vertical resize to see Anamorphic screen(2.35:1) on 720/50P 59.94P mode.
▪ Fast Mode : Used select Fast, Normal Mode
Fast mode minimize the delay time as it outputs Interlaced scanning Input not converting into
progressive scanning method. Normal Mode is used to output Interlaced scanning signal as
progressive scan.
▪ Back Light : Controls brightness of LCD backlight.
▪ Test Patt ern : Without additional Input signal, it provides internal Test Pattern of 1920 x1080 30p
format on the screen. (Off, Blue, Green, Red, 0~100% White)