Operating instructions

-- 12 --
Multi Format LCD Monitor
①: USB Updat e Port
You can update Firmware by this USB port. Please refer to category7 for detailed information.
② : REMOTE Port ,RJ-45 Jack – Through (RJ-45) Por t
Terminal for controlling the monitor by an external control. (Make/Trig Type)
Please refer to cagegory8 for detailed information.
③ : UPDATE Por t (RJ-11 Jack)
Serial Communication Port
This port is used to modify monitor program or to control Monitor.
Please refer to category for detailed information.
④ : AUDIO IN/OUT
Input/Output terminal for the external Audio and Embedded Audio Signal.
⑤ : SDI 1 , SDI 2 input.
⑥ : LOOP OUT j ack (Selected Active Thr u out)
⑦: Component input
Y,U,V (Y,Pb,Pr) and R,G,B
⑧: Component LOOP OUT
Component Loop Out port
To set Component Loop Out, set Analogue Loop into “ON” in the MENU/VIDEO
⑨: Composite / Y/ C(S-Video) I nput
⑩: Composite LOOP OUT
Composite Loop Out port
To set Composite Loop Out, set Analogue Loop into “ON” in the MENU/VIDEO
⑪: DVI -I input jack
⑫: HDMI input jack
⑬: PLD Updat e Port
Used for PLD Update port.
⑭ : AC I NPUT (AC 100V~220V)