Operating Instructions HD Digital Monitor (LCD Multi Format) Model BXM-170LS(17”) BXM-240LS(24”)
Products B X M Series • • • • Resolution 1366X768 Aspect ratio 16:9 Contrast 900:1 Viewing Angle:176 ˚(178 ˚ ) BXM-170LS • I nput : SDI (2EA,BNC), Analog(5EA,BNC), Y/C, DVI , HDMI , PC-RGB • Output : SDI (1EA,BNC), Analog(5EA,BNC) • Power : 12V DC(11V~17V)/AC100-230V ( 17 Inch HD LCD Monitor ) 사진 • • • • Resolution 1920 X 1200 Aspect ratio 16:10 Contrast 1000:1 Viewing Angle : 178 ˚ BXM-240LS ( 24 Inch HD LCD Monitor ) -- 2 -- • I nput : SDI (2EA,BNC), Analog(5EA,BNC), Y/C, DVI, HDMI, PC-RGB • Ou
Multi Format LCD Monitor -- 3 --
Multi Format LCD Monitor -- 4 --
Multi Format LCD Monitor -- 5 --
Multi Format LCD Monitor -- 6 --
Contents Thank you for purchasing this product, please read this instructions carefully and save this manual for later use Contents 1. Outline • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8 2. Function and Features • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8 3. Controls and Functions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 9 3-1. Front Panel• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 9 3-2.
Products Outline & Features 1. Product Outline BON HD Digital Monitor series are a Multi-Format HD Monitors with high core technology to display various kind of digital video input signals. It supports HD/SD-SDI, Composite/YC/YPbPr/RGB/DVI/PCRGB/HDMI(HDCP) Signals. 2.
Multi Format LCD Monitor 3. Controls and Functions 3.1. Front Panel ② ① ⑤ ⑥ ③ ④ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑭ ⑬ BXM Front Buttons ① STANDBY Power ON/OFF Button. This Button is operated after being pressed about 3 seconds. ② SDI 1, SDI 2 I NPUT SELECT : This is for selecting SDI Input. Additional OSD LOGO is displayed. ③ CVBS 1, CVBS 2, YC I NPUT SELECT This is for selecting CVBS1,2, Input and selecting YC Input. Each time user press this button, it converts CVBS1,2, Y,C Mode.
Multi Format LCD Monitor ⑨ FUNCTI ON 1 (F1, F2, F3, F4) These two Function buttons carries out the item selected in the SYSTEM Menu. ⑩ MENU When selected this button, OSD Menu is activated. Please refer to category 6. ⑪ ENTER , ⑪* ENTER/STATUS 1) When sets the OSD Menu used as Enter button. Please refer to category 6 for detailed information. 2) If the OSD Menu is not activated used for the input signal’s information display. ⑫ R. G. B.
Multi Format LCD Monitor 3.2. Rear Panel 1. USB 2. RJ-45(GPI) 3. RJ-11 x 2 4.
Multi Format LCD Monitor ①: USB Updat e Por t You can update Firmware by this USB port. Please refer to category7 for detailed information. ② : REMOTE Por t ,RJ-45 Jack – Thr ough (RJ-45) Por t Terminal for controlling the monitor by an external control. (Make/Trig Type) Please refer to cagegory8 for detailed information. ③: UPDATE Por t (RJ-11 Jack ) Serial Communication Port This port is used to modify monitor program or to control Monitor. Please refer to category for detailed information.
Multi Format LCD Monitor 3-3. Tally & Audio 1) Tally Display Tally Lamp Tally Colors are 2types(Red, Green), and can be selected by external contact terminal. 2) AUDIO Input/Output ① Analog Audio L/ R t er minal (St er eo Pin Jack ) The external audio signal is available through the speaker by a Menu setting. ② Analog Audio L/ R Output (St er eo Pin Jack) Terminal for output of De-embedded Analog Audio signal from SDI. The 16ch Audio Signal output is available by a Menu Setting.
Multi Format LCD Monitor 3-4. Function Button for F1, F2, F3, F4 Used to select the functions to be assigned to individual buttons F1 ~F4(front-panel buttons). Function 1. PC SCAN Aspect/Fill 2. Aspect Native/16:9 3. Pixel to Pixel On/Off 4. Anamorphic On/Off 5. PaP On/Off 6. PiP On/Off 7. Fast Mode On/Off 8. Time Code Display On/Off 9. Marker On/Off 10. Caption Display On/Off 11. Audio Display On/Off 12. Audio Mute On/Off 13. H/V Delay On/Off 14. Freeze Main On/Off 15. Freeze sub On/Off 16.
Multi Format LCD Monitor 1) Audio Level Display Mode. You can set Audio Level Display On/Off and display position. 2) Waveform Monitor Display You can set Waveform Monitor Display On/Off and display position by OSD Menu. ! Wave form is not available in YPbPr 1080p input. 3) Time Code Display You can set Time Code display On/Off and display position by OSD Menu. ! • Time Code Displaying is available SDI input only. 5.
Menu Setup 6. OSD MENU 6-1. VI DEO Setup ▪ Br ight ness : Adjusts brightness. ▪ Cont r ast : Adjusts Contrast. ▪ Chr oma : Adjusts Chroma. ▪ Phase(Hue): Adjusts Phase. ▪ Shar pness : Adjusts Sharpness. ▪ NTSC Set up : Selectable among 0 IRE,7.5 IRE VIDEO MENU 7.5 IRE -> -> Operates at NTSC or YUV Mode . ▪ Dithering : sets gradation effect.
Menu Setup 6-1-2. VGA Display Setup This Menu is displayed VGA Mode Only. ▪ V -Posit ion ▪ H -Posit ion : You can adjust V and H position in PC-RGB input mode. ▪ Phase: You can adjusts Phase ▪ Aut o Adj ust : You can adjust screen position automatically.. 6-2. Display ▪ PC SCAN : You can select display mode among Fill and Aspect. ▪ Aspect : Sets picture ratio as 16:9 or as Native ration in SD mode, 2k mode. ▪ Pix el t o Pix el(1:1) : This function is available only in 7” and 20” model.
Menu Setup 6-2-1. Display Sets Screen size mode or display status. ▪ PIP & PAP Main : Selects input of Main. ▪ PIP & PAP Sub : Selects input of Sub. ▪ Dual Display Type : In the Dual Display Mode, you can adjusts position and sized of picture. ▪ PiP Position : You can select position of Sub. ▪ W .F Display Mode : Selects W.F display Mode. ▪ W .F Line Select : Display selected line’s W.F and you can select the line by UP ▲ DOWN ▼ button. ▪ W .
Menu Setup 6-3. COLOR ▪ Color Temper at ur e : Sets color temperature on screen among 3200°K,5400°K,6500°K, 9300°K의 ▪ Adj ust Temper at ur e : Activates when User is set in Color Temperature RGB Gain and Bias are possible to control ▪ R,G,B Gain : Control each R,G, B Gain in USER mode ▪ R,G,B Bias : Control each R,G,B Bias in USER mode 6-4. MARKER ▪ Mark er 16:9 Used to set the type of Marker in 16:9 HD Signal. -> 4:3,15:9,14:9,13:9,1.85:1,2.
Menu Setup ▪ MENU Posit ion : Select for Center, Left Top, Right Top, Left Bottom, Right Bottom. ▪ Closed Capt ion : This function is available in Composite, YPbPr,l and Digital(HD/SD-SDI) signal. There are three selectable mode : OFF, CC 708, CC 608 (Transcoded, VANC, Line 21 Line), . This function displays character information included in CC signal on the screen..
Menu Setup 6-7. GPI PORT Setup ▪ GPI Cont r ol : Used to select external control terminal ON/OFF. I t is not possible to control through Remote terminal from outside or external area when it is OFF ▪ GPI Por t 1,2,3,4,5,6,7 Used to select each terminal of external Remote Control Terminal (RJ-45). However, GPI Port7 is fixed as Key Standby.
Multi Format LCD Monitor 7. Remot e Ter minal Assignment 7-1. Remot e Ter minal(RJ-45) Assignment Each terminal function can be set from the GPI CONTROL SETUP Menu. 1 2 3 4 5 6 7 8 Remote (RJ-45) Remot e PI N Assignment 1 PI N GPI Port 1 5 PI N GPI Port 5 2 PI N GPI Port 2 6 PI N GPI Port 6 3 PI N GPI Port 3 7 PI N GPI Port 7(Stand by Power ON/OFF) Fixed 4 PI N GPI Port 4 8 PI N COMMON(GND) 7-2. GPI Por t(RJ-11) Connection Control Terminal : 1 ~ 7 Pin Contact Point Switch.
Multi Format LCD Monitor 7-3.
Multi Format LCD Monitor 8. Program Updat e Port (RJ-11) Update Port(RJ-11) can be used in a situation as below. 1) To modify Firmware program 2) To control Color Temperature, Gamma Setting for LCD 3) To control Multi Monitors using PC Exclusive use program “Wall System Control” on PC Please consult w it h t echnician for Pr ogr am Updat e or for Ser ial Por t use. I ncorr ect use of t his por t may cause damage or malfunct ion.
Multi Format LCD Monitor 9. Program Updat e Port (USB) 1) Used for Firmware Update. 9-1 How to updat e t he fir mw ar e by USB por t. Set the Update Execute to Yes, and then, exit the menu by pressing menu button. Then, it automatically start update procedures.
Multi Format LCD Monitor 10. List of Compat ible Signal for mat s 10-1. Video Signals : BXM Ser ies NO I nput Signal Formats Component Composit e/ SY,Pb,Pr R,G,B Video √ √ √ √ √ √ √ √ √ √ Single √ √ √ √ √ √ HD/SD-SDI Dual Dual YUV4:2:2 YUV4:4:4 √ √ √ √ √ √ Dual RGB444 √ √ √ √ √ √ DVI / HDMI 1 2 3 4 5 6 7 9 9 10 NTSC PAL 525/60i (SD) 625/50i (SD) 720*480/59.94p 720*576/50p 1280*720/23.98p 1280*720/24p 1280*720/50p 1280*720/59.
Multi Format LCD Monitor 10-2.
Specifications 11. Specificat ions Section Input Output Analog Input Level SDI Input Analog Input DVI-RGB Input DVI Input HDMI SDI Output Analog Output Composite YC(S-Video) Component(Y/Pb/Pr) Component(R/G/B) DVI-RGB,Sync Level 2K Format Dual_YUV422 Dual_YUV444, Dual_RGB444 SMPTE 274M SMPTE 296M SMPTE 372M SMPTE 260M SMPTE 259M,125M ITU R-BT.
Demension 12.
RMA & Maintenance 13. Trouble shooting Solutions to common problems related to the monitor are described here. I f none of the solutions presented here solves the problem, unplug the monitor and consult an authorized dealer or service center. NO 1 Symptom No power supply Probable cause and corrective action • Firmly insert the Power Cord. Check the power. (100V ~220V) • Connect the signal cable firmly. Turn on the power of the connected component and set the output correctly.
Memo MEMO BON ELECTRONI CS, I NC. (Head Office) Tresbelle Sky B/D 2 F, 1479 Gayang2-Dong, Gangseo-Gu, Seoul, Korea Tel : (+ 82) 2-2659-0333 (113), fax: (+ 82) 2-2659-8133, brandon@gw.bon.co.kr john@bon.co.kr http://www.bon.co.
