Installation Guide

PS84964 4/19

Bon Tool Co. • Gibsonia, PA 15044 • USA • www.bontool.com

#84-964 Bon

Buster Bar

Hex Shank 1-1/8 inch (35 mm) hexagon

Tool Retainer Accepts jackhammer tools with standard

upset collar

Length 43 inches (1092 mm), less jackhammer tool

Impact Energy 1450 ft. lbs.

Frequency 10 to 20 blows/min as determined by operator

Weight 22 lbs (10 kg), less tool

Bon’s Buster Bar is a productive, cost-effective tool for many small job

solutions. Use it to cut asphalt, break frost, chop roots and more. No

more bulky compressors, leaking hoses or dangerous hot hydraulic oil

problems that occur when running a jackhammer on small jobs.

The Bon

Buster Bar produces an incredible 1450 ft lbs of destructive

energy per blow. Accepts a wide range of industry standard 1-1/8” x 6”

shank jackhammer tools for multiple applications. Concentrates the blow

force on the same spot until the job gets completed.

WARNING: Always wear eye and protective clothing when using any kind of construction tools

MULTI-USE:

CUT ASPHALT

BREAK CONCRETE

BREAK FROST

CHOP ROOTS

SPECIFICATIONS:

84-965 Moil Point

84-966 Narrow Chisel Bit

84-967 Wide Chisel Bit

ATTACHMENTS:

• Bits measure 14” under collar and 20-1/2”

overall with 1-1/8” hex

PAGE 1
® #84-964 Bon Buster Bar Bon’s Buster Bar is a productive, cost-effective tool for many small job solutions. Use it to cut asphalt, break frost, chop roots and more. No more bulky compressors, leaking hoses or dangerous hot hydraulic oil problems that occur when running a jackhammer on small jobs. The Bon® Buster Bar produces an incredible 1450 ft lbs of destructive energy per blow. Accepts a wide range of industry standard 1-1/8” x 6” shank jackhammer tools for multiple applications.