Installation Guide

A B C
Arm (R&L) Chair Back Chair Seat
2 1 1
D E F
Back Cushion Seat Cushion Pillow
2 2 2
LARGE PIECES
ASSEMBLY INSTRUCTIONS
*2 person assembly is required.
1. Begin by placing the right arm (A-R) down
on a soft at surface. (Fig. 1)
2. Attach the chair back (B) to the right arm
(A-R) by using 3 small Allen Bolts (G), and
3 at washers (J). Do not tighten the bolts
until all parts are assembled together.
4. Attach the left arm (A-L) to the assembled
unit using 2 medium Allen bolts (H) and 2
at washers (J). (Fig. 3)
3. Attach the chair seat (C) to the right arm
(A-R) and chair back (B) using 2 medium
Allen bolts (H), 3 large Allen bolts (I) and 5
at washers (J). (Fig. 2)
5. Turn chair to its upright position.
6. Connect the chair back (B) to the left arm
chair (A-L) by using 3 small Allen bolts (G)
and 3 at washers (J). (Fig. 4)
7. Ensure all bolts are aligned and assembled
correctly.
8. Tighten all Allen bolts (G), (H) and (I) with
the Allen wrench (K).
9. Place the seat cushions (E), the back
cushions (D) and the pillows (F) onto the
chair. (Fig. 5)
ASSEMBLY NOTES
• Please make sure that you have all the parts indicated before you begin assembly.
• Items should be assembled on a soft surface to avoid scratching during assembly.
• This product may need periodic tightening. We recommend tightening every 6 months.
• Caution: Do not overtighten.
CAUTION
Read all instructions before
assembly and use of this
product. Failure to follow these
instructions and warnings could
result in injury or damage to the
item. Keep these instructions for
future reference.
K
Allen Wrench
1
TOOLSSMALL PIECES
G H I J
Small Allen Bolt
(1/4”x28mm)
Medium Allen Bolt
(1/4”x32mm)
Large Allen Bolt
(1/4”x40mm)
Flat Washer
6 4 3 13
R L
K
GJ
B
A-R
D
F
E
E
F
D
Fig. 1
Fig. 2
Fig. 5
Fig. 3
Fig. 4
K
C
A-R
K
H
J
J
B
I
K
C
A-L
A-R
H
J
B
B
J
G
K
C
A-L
A-R