User manual

I: Inspect, verify, clean, adjust,
lubricate or replace if
necessary
EVERY
C: Clean
L: Lubricate
R: Replace
Initial in-
spection
10 h or
30 days
or 300 km
(185 m.)
(1)
25 h or
750 km
(470 m.)
50 h or
1500 km
(930 m.)
100 h or
1 year or
3000 km
(1865 m.)
200 h or
2yearsor
6000 km
(3730 m.)
To be
performed
by
SUSPENSION
Trailing arms I I Dealer
McPherson struts I I Dealer
Rear shock absorbers I I Dealer
A-arms I I Customer
Ball joints I I Dealer
BRAKE
Brake fluid (front and rear)
(2)
I I R
(6)
Customer
Brake pads I
(4)
Customer
Brake system (discs, hoses, etc.) I Customer
BODY/FRAME
Engine compartment C C Customer
Frame I Dealer
Hitch/trailer ball condition
(if installed)
EVERY RIDE Customer
Chassis Fasteners I Customer
Seat fasteners EVERY RIDE Customer
Vehicle cleaning and protection C
(4)
Customer
(1)
To be performed by an authorized Bombardier ATV dealer. The initial
maintenance is very important and must not be neglected.
(2)
Pre-ride inspection item.
(3)
Every 100 hours, check coolant strength.
(4)
More often under severe use such dusty area, sand, snow, wet or muddy
conditions
(5)
Make sure the spark plug is correctly gapped.
(6)
To be performed by an authorized Bombardier ATV dealer.
94
______________________