User manual

I: Inspect, verify, clean, adjust,
lubricate or replace if
necessary
EVERY
C: Clean
L: Lubricate
R: Replace
Initial in-
spection
10 h or
30 days
or 300 km
(185 m.)
(1)
25 h or
750 km
(470 m.)
50 h or
1500 km
(930 m.)
100 h or
1 year or
3000 km
(1865 m.)
200 h or
2yearsor
6000 km
(3730 m.)
To be
performed
by
ELECTRICAL
Spark plug
(5)
I R Customer
Battery connections I I Customer
Wiring harnesses, cables and
lines
I I Dealer
Condition of ignition switch, start
button and engine stop switch
(2)
I I Customer
Condition of lighting system
(HI/LO intensity, brake lamp,
headlamp aiming, etc.)
(2)
I I Customer
Winch Refer to ATV Winch Operator's Manual Customer
DRIVE TRAIN
Drive shaft boots and protectors
(2)
I I Customer
Drive shaft joints I Dealer
Rear propeller shaft joint I L
(4)
Dealer
Wheel bearings condition I Customer
Front/rear differentials
(oil level, seals and vents)
I I R Dealer
STEERING
Handlebar fasteners I Dealer
Throttle/housing/cable
condition
(2)
I I Customer
Choke condition
(2)
I I Customer
Steering system
(column, bearing, etc.)
I I
(4)
Dealer
Tie rod ends I Dealer
Wheel nuts/studs I I Customer
Tires pressure and wear
(2)
EVERY RIDE Customer
Front wheels alignment I I Dealer
_____________________
93