User manual

Rear Suspension
Inspect shock absorber for oil leaks
and fasteners for tightness. See an
authorized Bombardier ATV dealer as
necessary.
Trailing Arms
Check trailing arms for distortion,
cracks or bending. See an authorized
Bombardier ATV dealer if any problem
is detected.
A-Arms
Check A-arms for cracks, bending or
other damages. See an authorized
Bombardier ATV dealer as necessary.
Adjustment
Rear Shocks

WARNING
Left and right adjustment cams
must always be set to the same
position. Never adjust one adjust-
ing cam only. Uneven adjustment
can cause poor handling and loss
of stability, which could lead to an
accident.
Preload Adjustment
Adjust spring preload by turning ad-
justing cam accordingly, with the ad-
justing wrench in vehicle tool box.
Turn the adjusting cams clockwise for
a firmer ride and rough road condition
or when carrying cargo or pulling a
trailer.
Turn the adjusting cams counterclock-
wise for a light load and a smooth road
condition.
V07J01Y
21 3
1. Adjusting cams
2. Smooth adjustment
3. Hard adjustment
Brake
Front and Rear Brakes
The front and rear brakes are hydraulic
disc types. These brakes are self-ad-
justing and require no adjustment.
The brake lever and the brake pedal
require no adjustment.
Check the following to keep the
brakes in a good operating condition:
– brake system for fluid leaks
– brake for spongy feel
– brake discs for excessive wear and
surface condition
– brake pads for wear, damage or
looseness.
SERVICE LIMITS
Brake pads
thickness
1 mm (.040 in)
Front discs
thickness
3.5 mm (.138 in)
Rear disc
thickness
4.3 mm (.170 in)
Maximum discs
warpage
0.3 mm (.010 in)
108
_____________________